How Many Byes Does a Pool Tournament Need, and Who Should Get Them?
A single-elimination bracket only divides cleanly when the number of players is a power of two: 4, 8, 16, 32, 64. Club events rarely cooperate. Thirteen people enter, or twenty, or seventeen. The standard fix is the bye: some players skip the first round and go straight into the second. This guide shows how many byes each field needs, where they go, which field sizes are awkward, and the alternatives, using our Tournament Bracket Generator.
How many byes are needed?
The generator pads the field up to the next power of two. The difference between that bracket size and the number of players is the number of byes. Everyone else plays a first-round match.
| Players | Bracket size | Byes | First-round matches | Rounds |
|---|---|---|---|---|
| 5 | 8 | 3 | 1 | 3 |
| 6 | 8 | 2 | 2 | 3 |
| 7 | 8 | 1 | 3 | 3 |
| 9 | 16 | 7 | 1 | 4 |
| 10 | 16 | 6 | 2 | 4 |
| 12 | 16 | 4 | 4 | 4 |
| 13 | 16 | 3 | 5 | 4 |
| 17 | 32 | 15 | 1 | 5 |
| 20 | 32 | 12 | 4 | 5 |
| 24 | 32 | 8 | 8 | 5 |
| 28 | 32 | 4 | 12 | 5 |
| 33 | 64 | 31 | 1 | 6 |
| 40 | 64 | 24 | 8 | 6 |
| 48 | 64 | 16 | 16 | 6 |
The number of byes swings wildly with small changes in entries. Thirteen players need only 3 byes; twelve need 4; nine need 7. Just past a power of two is the worst place to be: seventeen players need 15 byes, and thirty-three need 31.
Who gets the byes?
By standard practice, the top seeds. The generator gives byes to seeds 1, 2, 3 and so on, as many as are needed. Because of the way standard seeding spreads the top seeds across the bracket, the byes are spread too: each one sits in a different part of the draw, so no two byes ever meet each other and no part of the bracket is empty.
Here is a twelve-player first round:
| Line | Top | Bottom |
|---|---|---|
| 1 | seed 1 | bye |
| 2 | seed 8 | seed 9 |
| 3 | seed 4 | bye |
| 4 | seed 5 | seed 12 |
| 5 | seed 2 | bye |
| 6 | seed 7 | seed 10 |
| 7 | seed 3 | bye |
| 8 | seed 6 | seed 11 |
Seeds 1 to 4 have byes, one in each quarter. The other eight players play 4 matches, and the winners join the seeded players in a full eight-player second round.
Is a bye really an advantage?
Yes, in two ways. A player with a bye has one fewer match to win, and every match is a chance to lose. They also arrive at the second round fresh, while their opponent has just finished a match. In a scratch event, where seeds are the strongest players, that reward for ranking is widely accepted. In a handicapped event, where every match is meant to be close, it is harder to justify; see running a handicapped knockout, which suggests drawing the byes instead.
There is also a small cost: a player with a bye waits while the first round is played. In a large first round on few tables, that wait can be long. Tell bye players when they need to be back.
The awkward case: one more than a power of two
With seventeen entries, the bracket size jumps to 32. The generator gives 15 byes and leaves just 1 real first-round match: seed 16 against seed 17. Here is how the twenty-player version looks, with 12 byes and 4 matches:
| Line | Top | Bottom |
|---|---|---|
| 1 | seed 1 | bye |
| 2 | seed 16 | seed 17 |
| 3 | seed 8 | bye |
| 4 | seed 9 | bye |
| 5 | seed 4 | bye |
| 6 | seed 13 | seed 20 |
| 7 | seed 5 | bye |
| 8 | seed 12 | bye |
| 9 | seed 2 | bye |
| 10 | seed 15 | seed 18 |
| 11 | seed 7 | bye |
| 12 | seed 10 | bye |
| 13 | seed 3 | bye |
| 14 | seed 14 | seed 19 |
| 15 | seed 6 | bye |
| 16 | seed 11 | bye |
Structurally this is fine. The first round becomes a play-in for the lowest seeds, and the rest of the event is a normal sixteen-player bracket. In practice, though, most of the room is waiting while a handful of matches are played, and the lowest seeds have to win an extra match to reach the same place as everyone else. A few ways to handle it:
- Accept the play-in. Schedule the first-round matches early, and tell everyone else to arrive later.
- Cap the entries. If the venue suits a 16-player event, close entries at 16 and keep a reserve list for withdrawals.
- Grow the field. Sometimes a few more entries can be found to fill a 32-player bracket. If not, many byes are better than a cramped schedule.
- Play groups first. Split the field into round-robin groups and take a power-of-two number of qualifiers into the knockout. Our guide to round robin or knockout shows match counts for this.
Byes and the total number of matches
Byes do not change how many matches the event needs. Every match eliminates exactly one player, so a field of n players always needs n − 1 matches to produce one winner. Twelve players need 11 matches whether or not there are byes; seventeen need 16; forty-eight need 47. What byes change is how those matches are spread: a field with many byes has a short first round and full later rounds.
The number of rounds is set by the bracket size: 4 for twelve players, 5 for seventeen. For a long evening, it is the rounds that matter, since each round has to finish before the next one starts.
What about walkovers and withdrawals?
A bye is planned; a walkover happens when a player who should be in a match is absent. Treat them differently:
- A withdrawal before the draw is simply a smaller field. Generate the bracket again.
- A withdrawal after the draw but before play usually gives the opponent a walkover into the next round. Some organizers prefer to promote a reserve into the empty place instead, which keeps the bracket full.
- A withdrawal during the event is a walkover for whoever was due to play them.
Decide the policy before the event, and announce it, so that a withdrawal does not become an argument.
A quick planning checklist
- Count confirmed entries and look up the bracket size, byes and rounds in the table above, or enter the number into the bracket generator.
- If the field is just above a power of two, decide between a play-in, a cap, or groups.
- Decide whether byes go to the top seeds (standard) or are drawn (better for handicapped events).
- Tell bye players when their first match is likely to start.
- Publish the withdrawal and walkover policy.
Common questions
Does a bye count as a win?
For progressing in the bracket, yes: the player advances as if they had won. For statistics, such as a player's match record or a club's ranking points, most organizers do not count it as a match played or won. Say which you do in the event rules, especially if ranking points depend on rounds reached.
Can a bye be placed anywhere in the bracket?
It can, but standard seeding puts them where they do least damage to the structure: spread across the draw, one per section, and against the top seeds. If byes are placed by hand, avoid two byes in the same first-round section, or a second-round match ends up with no opponent at all.
What if a top seed would rather play?
Some players dislike sitting out while everyone else warms up in a match. That is their choice to raise, but changing the bracket for one player is rarely worth the complication. Offer a practice table instead.
Summary
- Byes = bracket size minus players. Twelve players need 4, thirteen need 3, seventeen need 15.
- Standard seeding gives byes to the top seeds and spreads them across the draw.
- Fields just above a power of two produce a tiny first round; consider capping entries or using groups.
- Any knockout of n players takes n − 1 matches, with or without byes.
For the logic behind the pairings themselves, see how seeding works in a pool bracket.