How Long Does a Pool Round Robin Take? Rounds, Matches and Table Time for 4 to 12 Players
A round robin is the fairest simple format there is: everyone plays everyone once, and the standings reflect the whole event rather than one bad match. Its weakness is time. Double the number of players and the number of matches roughly quadruples. Before you promise a group of friends a one-night round robin, it is worth knowing how many matches you are signing up for and how many tables you need. This guide gives the figures from our Round-Robin Scheduler and turns them into hours.
How many matches does a round robin need?
Every pair of players meets once, so the number of matches is the number of pairs. The scheduler arranges them into rounds where nobody plays twice. With an even number of players everyone plays every round; with an odd number, one player sits out each round on a bye.
| Players | Rounds | Matches per round | Matches in all | Matches each |
|---|---|---|---|---|
| 4 | 3 | 2 | 6 | 3 |
| 5 | 5 | 2 | 10 | 4 |
| 6 | 5 | 3 | 15 | 5 |
| 7 | 7 | 3 | 21 | 6 |
| 8 | 7 | 4 | 28 | 7 |
| 9 | 9 | 4 | 36 | 8 |
| 10 | 9 | 5 | 45 | 9 |
| 11 | 11 | 5 | 55 | 10 |
| 12 | 11 | 6 | 66 | 11 |
Two patterns are worth noticing. First, the total grows quickly: 15 matches for six players, 28 for eight, 66 for twelve. Second, odd and even fields of nearly the same size need the same number of rounds. Seven players and eight players both need 7 rounds; the seven-player event simply has a bye in each round. If you are one player short of an even number, you lose matches but not time.
From matches to hours
The real limit is tables. A round can only be played at once if there is a table for every match in it. With fewer tables, each round needs more than one sitting. The chart below assumes 30-minute matches and plays each round to the end before the next begins, which is the simplest way to run a schedule and the slowest.
| Players | 1 table | 2 tables | 3 tables | 4 tables |
|---|---|---|---|---|
| 4 | 3 h | 1.5 h | 1.5 h | 1.5 h |
| 6 | 7.5 h | 5 h | 2.5 h | 2.5 h |
| 8 | 14 h | 7 h | 7 h | 3.5 h |
| 10 | 22.5 h | 13.5 h | 9 h | 9 h |
| 12 | 33 h | 16.5 h | 11 h | 11 h |
Read it as "hours of play, start to finish". Eight players on two tables need 7 hours; on four tables, 3.5. Twelve players on four tables still need 11 hours, which is more than most venues or players want in an evening.
Notice that adding a table only helps if it reduces the number of sittings per round. Eight players have 4 matches per round, so two tables mean two sittings and three tables still mean two sittings: the chart shows 7 hours for both. The fourth table is the one that cuts the time in half.
What sets the match length?
The 30-minute figure is only a planning number. Real match length depends on:
- The race. A race to 3 in eight-ball may take 20 minutes between evenly matched league players; a race to 7 can take well over an hour.
- The game. Nine-ball racks are often quicker than eight-ball racks at club level; straight pool is measured in points, not racks.
- The players. Experienced players run out more and play quicker safeties; newer players take longer per rack.
- The gaps. Changeovers, scorekeeping and breaks add up. Allow a few minutes per match.
Time a few matches at your venue with your players and use that figure. With 45-minute matches the eight-player, two-table event grows from 7 hours to 10.5.
How to fit a bigger field into one night
If the figures above are too long, there are several honest ways to shorten the event without abandoning the format:
- Shorten the races. Halving match length halves the total. A race to 2 or 3 makes a large round robin feasible in one evening, at the cost of more random results.
- Split into groups. Two groups of six play 15 matches each, 30 in all, instead of 66 for twelve together. The group winners (or the top two from each) then play off. Our guide to round robin versus knockout covers hybrid formats.
- Spread it over several nights. A league is just a round robin played one round a week. Twelve players need 11 rounds, which suits a season.
- Do not wait for the round to finish. When a table frees up, start the next match whose players are both free. This cuts idle time, but it needs someone keeping a close eye on the schedule, so it suits experienced organizers.
Worked example: a six-player Saturday
Six friends, three tables, races to 3 in eight-ball, each match about 30 minutes. The scheduler gives 5 rounds of 3 matches, 15 matches in all. Three tables cover a full round in one sitting, so the event takes 2.5 hours of play. With two tables it would take 5 hours, because each round would need two sittings.
Here is the full fixture list:
| Round | Matches (player numbers) | Sits out |
|---|---|---|
| Round 1 | 1 v 6, 2 v 5, 3 v 4 | nobody |
| Round 2 | 1 v 5, 6 v 4, 2 v 3 | nobody |
| Round 3 | 1 v 4, 5 v 3, 6 v 2 | nobody |
| Round 4 | 1 v 3, 4 v 2, 5 v 6 | nobody |
| Round 5 | 1 v 2, 3 v 6, 4 v 5 | nobody |
Each player plays 5 matches. With an even field nobody sits out, so everyone is busy every round and the evening has no gaps.
Worked example: an eight-player league night
Eight players, two tables, 45-minute matches. That is 10.5 hours for a full round robin: too much for one night. As a league over a season, though, it is ideal: 7 weeks of one round each, with every player playing once a week and each round taking 1.5 hours on two tables. If the league wants every player to meet every other twice (home and away), run the schedule a second time with the order reversed, for 28 matches each half.
Things the schedule cannot fix
- No-shows. In a one-night event, a missing player creates a bye in every round they were due to play. Decide in advance whether unplayed matches count as losses or are ignored.
- Uneven tables. If one table plays very differently, some players get it more than others. Rotate tables between rounds where you can.
- Ties in the standings. With few matches per player, ties are common. Publish the tie-break rule before play: head-to-head result, then games won, then a deciding frame, for example.
Common questions
Why does the scheduler stop at twelve players?
Because beyond that, a single round robin stops being practical for an evening or even a short season. Twelve players already need 66 matches. A larger group is better served by splitting into groups, or by a league season with several divisions.
Can players play two matches in a row?
Within the scheduler's rounds, no: each player appears once per round. Between rounds, it is possible, for example when the player sat in the last match of one round and the first of the next. If rest matters, start each round with the matches whose players finished earliest in the previous round.
How do I record results?
A grid with players along both edges works well: each cell holds the rack score of that pairing. Totals along each row give the standings, and the grid shows at a glance which matches are still to play.
Summary
- Matches grow roughly with the square of the field: 15 for six players, 28 for eight, 66 for twelve.
- Rounds equal the field size minus one for even fields, and the field size for odd ones.
- Time depends on tables: an extra table only helps if it removes a sitting from each round.
- For big fields, shorten races, split into groups, or spread the schedule over a season.
Generate the fixture list for your own field in the Round-Robin Scheduler.